Problem
| Info |
|---|
I have a problem |
Solution
step 1
step 2Loosen all 5 screws, including the jacking screw (might be covered by plastic cable tie).
Re-adjust the motor gear where it is slightly touching the zoom gear.
There are 4 screws attaching the motor gear to the zoom cell gear.
The screw at the center is the jacking screw, which pushes the motor gear in and out.
Tighten the 4 screws in conjunction with the jacking screw. The jacking screw should not be forced into the part
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|