Page Comparison

Number

Item

Micro-Vu Item #

Description

1

Fuse

6.3A, Logic Board Power Input. 

2

E-Stop Jumper

N/A

Jumper used to bypass in-machine E-Stop.

Only used in Vertex machines.

3

ADIO Enable Switch

N/A

By default should be switched towards ‘Bypass’.

4

ADION/A

N/A

5

LEDN/A

Board power in indicator .LED:

Is it illuminated?

• Yes, indicates power is delivered to the board.
• No, indicates power is not being delivered to board. Check Amplifier board is fully powered and operational (SC8069332). Check power cable between logic board and amp board, pins, and connectors.

6

LEDN/A

Board subsystems power indicator.

Are all LEDs illuminated when the machine is powered on?

• Yes, indicates normal behavior.
• Not all LEDs illuminated LED #5 not illuminated indicates power not delivered to board.
• Not all LEDs illuminated and LED #5 is illuminated indicates board and/or connected devices are not operating properly.