...
Ensure the capstan tension bolt is fully released before proceeding.
...
Loosen the tension bolts on the end/ends of the band so the band moves freely.
...
2. Move the stage to the end of travel, near the hard stop.
...
8. Torque the tension bolt/bolts to 13 18 Nm.
It may be necessary to repeat each adjustment step several times due to the movement of the band when tightened.
...
Ensure the band is correctly aligned before proceeding.
Loosen the tension bolt on the capstan drive.
Finger tighten the tension bolt.
Tighten the tension bolt an additional 1⁄2 – 3⁄4 turn.
Check sync error using Alpha Tune Test