Info |
---|
The Logic board is item #SC8069331 used in Vertex 261, 34X and Excel 51X, 70X, 90X, 130X, 170X, 2500 models. |
Number | Item |
Micro-Vu Item #
Description | ||
1 | Fuse | 6.3A, Logic Board Power Input. |
2 | E-Stop Jumper |
Jumper used to bypass in-machine E-Stop. Only used in Vertex machines. | |
3 | ADIO Enable Switch |
N/A
By default should be switched towards ‘Bypass’. | |
4 | ADIO |
N/A | |
5 | LED |
N/A
Board power |
indicator |
LED: Is it illuminated?
| |
6 | LED |
N/A
Board subsystems power indicator. Are all LEDs illuminated when the machine is powered on?
|
Number | Item | Micro-Vu Item # | Description |
7 | Fuse | 4A, Rotary stage power input. | |
8 | Fuse | 4A, Platen power input. | |
9 | Fuse | 1.5A, GPIO1 power input. | |
10 | Fuse | 1.5A, GPIO2 power input. | |
11 | Fuse | 0.375A, Pendant 5V power input. | |
12 | Fuse | 0.375A, Pendant 3.3V power input. | |
13 | LED | N/A | Board firmware state indicators. Are both LEDs blinking, not necessarily in sync?
|
|
In Vertex models the Logic Board is located in the back of the machine in the electrical panel:
...
In the Excel models the Logic board is located on the side of the machine in the electrical panel:
...