Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

These instructions are for machine models Vertex 34X and Excel 51X-2500.

  1. Before removing the previous scale, mark with a pencil the borders of its location so it can be used as a reference for the new scale. Proceed to remove the adhesive backing from the scale and place it on the back plate following the previous scale marked position

  1. Remove the center of the track and discard the center.

  • No labels

Product information is subject to change without prior notice as a result of ongoing technical development