Installing Outboard Leg Cover on Excel 511, 512

Owned by Gabi Vergara
Last updated: Dec 15, 2021
1 min read

  1. All outboard Y bellows should be installed at the end.

  2. Install 2 rubber M4 grommets on the OUTBOARD LEG COVER. Install the OUTBOARD LEG COVER using 4 button head socket 4 x 8 mm. Make sure not to pinch the profile light cable.

     

  3. Install the OUTBOARD COVER into the sides of the machine using 4 cap head socket screws 6 x 16 x 1 mm.

 

Product information is subject to change without prior notice as a result of ongoing technical development