Vertex Jacking Screw Adjustment

Owned by Gabi Vergara
Apr 06, 2022
2 min read

  1. Remove the jacking screw cap. A coin can be used for the large slot.

 

2. Use something thin to position the bearing pad directly below the jacking screw.

 

3. Tighten the jacking screw until it contacts the bearing pad. After the screw makes contact, continue to turn the screw ~1 additional rotation (clockwise). This will lift the stage up.

 

4. Reinstall the jacking screw cap.

 

Product information is subject to change without prior notice as a result of ongoing technical development