Excel & Vertex Hardware How-To
- Encoders and Readheads for Excels X,Y, Z and Vertex Z.
- Logic board installation guideline
- Replace bearing blocks on Z-axis
- Adjust Rotary Encoder
- Level the Vertex X and Y Stages
- Pack a Vertex 261, 34X on its Crate
- Vertex X,Y Linear Encoder Alignment
- Replace E-Stop Button on Excel
- Replace an Excel Y scale
- Kevlar Cable Routing Steps
- Kevlar Cable for Excel Profile Light
- Anti-Backlash Lead Drive Screw Adjustment
- Installing Z scales
- Replacing the Standby Button and Front Status Light in a Vertex or Excel Machine
- Encoder Calibration
- Realigning the Drive Vertex 261 - 342
- Band Alignment and Capstan Tension Bolt Adjustment
- Band Alignment Excel 51X - 2500 and Tightening the Idler Tension Bolt
- Z-Axis Alignment
- Vertex Jacking Screw Adjustment
- Installing Inboard Mast Covers on Excel 511, 512
- Installing Outboard Leg Cover on Excel 511, 512
- Installation of Electronics Door Latch
- Z Axis Drive Nut and Tube Assembly
- Z Motor Replacement
- Remove/Replace Z-Cover on Excel Machines
Product information is subject to change without prior notice as a result of ongoing technical development