Page Comparison

...

Check the lights of the probe module and probe head when attaching and triggering touching the touchprobe touch probe carefully with a finger:

1. The PH6 LED should be on when the TP-200 module is not attached

2. The PH6 LED should be on when the TP-200 module is attached

3. Triggering Touching the TP-200 module when InSpec is not set to touchprobe touch probe should:
   the PH6 probe head LED should not blink but it will remain on
   the TP-200 probe module LED should remain off

4. Triggering Touching the TP-200 module when InSpec is set to touchprobetouch probe:
   the PH6 probe head LED should blink off
   the TP-200 probe module LED should light up with a brighten by an amount commensurate with the probe force as it is deflected.

More detailed debugging instructions can be found at P2 Touchprobe Touch Probe Check