Versions Compared

Version Old Version 1 New Version Current
Changes made by

Gabi Vergara

Gabi Vergara

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

  1. All outboard Y bellows should be installed at the end.

  2. Install 2 rubber M4 grommets on the OUTBOARD LEG COVER. Install the OUTBOARD LEG COVER using 4 button head socket 4 x 8 mm. Make sure not to pinch the profile light cable.

    Image RemovedImage Added

  3. Install the OUTBOARD COVER into the sides of the machine using 4 cap head socket screws 6 x 16 x 1 mm.

...