Problem
| Info |
|---|
This is for machine models Post 2020 Machines |
Solution
Check if the the LEDs on Amplifier Board and Logic Boards are on.
- If they are on, use the Amplifier Board power button to turn the machine on.
.jpg?version=1&modificationDate=1610071312755&cacheVersion=1&api=v2)
- If they are off, then check/replace the power supply, rocker switch, and amplifier board.
Check the following articles for board LEDs expected behaviors:
https://microvu.atlassian.net/l/c/kL1aaw5h
https://microvu.atlassian.net/l/c/PXtqApXH
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|