Machine can not be powered on.

Problem

Solution

1. Check if the the LEDs on Amplifier Board and Logic Boards are on.

1. If they are on, use the Amplifier Board power button to turn the machine on.
   
   

Open

1. If they are off, then check/replace the power supply, rocker switch, and amplifier board.

Check the following articles for board LEDs expected behaviors:

https://microvu.atlassian.net/l/c/kL1aaw5h

https://microvu.atlassian.net/l/c/PXtqApXH

Open Motorscope https://microvu.atlassian.net/l/c/iNCu0qCQ and check in the configuration view that the Logic Board and Zoom Board are enumerated. The enumeration of the boards should look like the following image:

Open

Related articles