...
Number | Item | Description |
1 | Fuse | 1.5A, GPIO2 power input. |
2 | Fuse | 6.3A, zoom board power input. |
3 | LED Bank | Board input and subsystems power 24V – Board input power indicator: - Illuminated LED indicates the board has power.
- Not illuminated LED indicates the board has no power. Check fuse #2 and/or power from motor amplifier board.
5V & 3.3V Board subsystem power indicator: - Illuminated LED is the expected behavior.
- Not illuminated LED and #3 24V is illuminated indicates the zoom board or a component connected to the zoom board is defective.
|
4 | LED Bank | Board firmware state indicators: - Both LEDs flashing indicate nominal state.
- An always on or always off (not flashing) on either LED indicates firmware failure or lack of power.
|
5 | Fuse | 2A, Ringlight driver power input. |
The Zoom board is located on the left-hand side of the Z-axis, when looking at the machine from the front:
...