| Info |
|---|
These instructions are for machine models Vertex 261, 34X and Excel 51X-2500. This procedure should only be performed by authorized Micro-Vu dealers. |
To replace a scratch scratched scale, the items needed are a new scale and end caps to secure the scale in place. The fast track could be left in place and reused. Scale items are 8739171C8730134, 8739172C8730135, and 8739173 C8730136 (160 mm, 250 mm, and 400 mm respectively) depending on the Z height of the machine. End caps set of two can be purchased using item number 8739192are included with the scale.
Fixtures are used to place the Q limit and P limit magnets in the correct locations as shown in the images, this fixture is not available for sale, therefore our recommendation is to not move the Q and P limits from the Fastrack. If the limits must be moved, then make sure the location of these limits are marked in order to place them back on their original position.
...