...
Info |
---|
This article only applies to P2 Machines |
In some rare cases, the camera image is mirrored or flipped after the PC is restored from standby mode.
...
close InSpec
shut down the computer
switch off Micro-Vu machine by flipping the switch on the back of the machine or unplugging the power supply
wait for 15 seconds
reconnect the machine to the power supply
boot computer
turn on the Micro-Vu machine
launch InSpec
Info |
---|
If the error still persists, the optics calibration needs to be performed. |
In order to avoid this error in the future, disable the energy-saving settings by following the instructions below:
...