Versions Compared

Old Version 2

changes.mady.by.user Gabi Vergara

Saved on

compared with

New Version Current

changes.mady.by.user Hanno Mueller

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

This is These instructions are for Pre 2020 Machines only and Post 2020 Machines

InSpec Classic software has the ability to “Home” the stage by pressing the F8 button on the keyboard. When pressing F8 on the keyboard the machine moves to a loading position, which varies between Vertex and Excel systems.

The load position can be changed to a different camera/stage position following these steps:

  1. Open the Machine.ini file located by default in the following address: C:\ProgramData\Micro-Vu Corporation\InSpec for Windows\”MACHINE SERIAL NUMBER”

  2. Add to the Machine.ini file:

    1. on Pre 2020 Machines :

      [Alpha]

      Load Position X=Off

      Load Position Y=Min

      Load Position Z=Max

    2. on Post 2020 Machines :

[PH2]

Load Position X=Off

Load Position Y=Min

Load Position Z=Max

These are the values that can be set for each axis to control the Load Positionload position:

Off - Do not move that specific axis

...