Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

A zoom lens failure usually indicates an internal mechanical problem in the zoom cell since the zoom motor rarely fails:

  1. Check the zoom lens (also known as the zoom cell).

  2. Remove the motor assembly.

  3. Spin the zoom gear and make sure it is smooth.
    *If there’s even the slightest mechanical hitch or drag, it will stall the zoom lens and needs to be replaced.

If no issues were found with the steps above, please refer to the following article to further troubleshoot the cause: Align zoom motor and zoom gear when zoom stalled

Micro-Vu typically sells the zoom assembly together to ensure the problem is fixed in one replacement. Please refer to the following articles for warranty, repair, and exchange policies.

  • No labels