Post 2020 machines signal error conditions with audible or visual codes which are included in the table below.
Error conditions are signaled by blinking of the “information light” next to the power button of the machine and the firmware LED on the logic board. High priority codes will be accompanied by audible beeping of the same pattern.
Normal operation is indicated by 1/2 second on (1) and followed by 1/2 second off (0) continuous blinking.
- Normal operation is indicated by 1/2 second on (1) and followed by 1/2 second off (0) continuous blinking.
- Normal operation is indicated by:
1/2 second on (1) followed by
1/2 second off (0) continuous blinking.
- Error condition is indicated by:
2 second off (0) followed by1/4 second (short) or
Fault Codes