Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Problem

This is for machine models Post 2020 Machines

Solution

  1. Check if the the LEDs on Amplifier Board and Logic Boards are on.

  • If they are on, use the Amplifier Board power button to turn the machine on.
  • If they are off, then check/replace the power supply, rocker switch, and amplifier board.

  • No labels

Product information is subject to change without prior notice as a result of ongoing technical development