Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

  1. All outboard Y bellows should be installed at the end.

  2. Install 2 rubber M4 grommets on the OUTBOARD LEG COVER. Install the OUTBOARD LEG COVER using 4 button head socket 4 x 8 mm. Make sure not to pinch the profile light cable.

  3. Install the OUTBOARD COVER into the sides of the machine using 4 cap head socket screws 6 x 16 x 1 mm.

  • No labels

Product information is subject to change without prior notice as a result of ongoing technical development