Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This article shows how to align a component which is held by a rotary like the RSD-60 horizontal. This technique is using two Z-measurements to rotate the axis such that the flat surface is parallel to the X-Y plane of the machine.

The following video shows the exact workflow:

https://www.youtube.com/watch?v=R06NC4dJot4

Instructions

The following steps give a summary of the basic workflow

  1. create system based on Closest Edge point

  2. create Closed Spline to trace perimeter of the part

  3. create system at the centroid of the part

  4. skew X or Y of system to distance between centroid and spline

 

Filter by label

There are no items with the selected labels at this time.

  • No labels

Product information is subject to change without prior notice as a result of ongoing technical development