| Info |
|---|
These instructions apply to P2 Post 2020 Machines |
When replacing the Logic board on a P2 Machines please note:
When purchasing a A spare logic board (item SC8069331) it will include a jumper inside the bag. This jumper should be plugged into the logic board if the board is installed on a P2 Post 2020 Machines Vertex model only.
...
If the logic board is installed on an Excel machine, the jumper should not be installed on the logic board.
...
After replacing the Logic Board turn the machine on and open Motorscope.
Motorscope should open in the Configuration view. Else click on View-Configuration:
Select In the Machine Configurator section, select the machine model from the Machine List drop-down menu.
Type the machine serial number and enter the information that has not been automatically configured such as: ENTER INFO HEREthe rest of the fields will be filled automatically.
Select Temporarily Configure.
...