Page Comparison

...

6. Leave MotorScope open. Open IC Capture and connect to the machine’s camera.

7. Set Apply the correct settings in the Device Properties:

   1. Enable Trigger

   2. Enable IMX Low-Latency Mode

...

8. Set the correct format along the top:

   1. YUY2 with , 2X skipping Skipping for color (camera systems.

   2. Y800, 2X Binning for monochrome camera systems as displayed in Image ‘Step 8’ shows settings for a monochrome camera).

   3. FPS to 232.06

...

9. The camera should be streaming at 28 FPS. Verify the camera is live in IC Capture by e.g. shining a light into the lens.

...